Monday, October 23, 2017

Posted by September 29, 2017

Maritime Propulsion

Another Milestone for RRS Sir David Attenborough Build

Photo courtesy of Rolls-Royce

Rolls-Royce is marking another milestone on the journey toward the completion of Britain’s new polar research vessel the RRS Sir David Attenborough being built by Merseyside shipyard Cammell Laird.

 
The last of the vessel’s Bergen B33:45 engines/gensets have been craned into the ship’s hull at Cammell Laird ready to be connected to the RRS Sir David Attenborough’s Rolls-Royce propulsion system.
 
The nine cylinder engines are carefully installed in three separate pieces. The first part of the nine cylinder engine to be craned into place was its double resilient foundation. This huge specialized rigid welded skid, which sits on rubber noise dampers, is an integral part of the vessel’s low underwater radiated noise design. The foundation is followed by the engine itself and then the alternators.
 
Professor Dame Jane Francis, British Antarctic Survey (BAS), Director, said, “All of our scientists, engineers and support teams are watching the build progress of our new ship with excitement. This latest milestone takes us a step closer towards using this state-of-the-art research facility. Our engineers and scientists need the ship’s engines to be quiet during underwater scientific experiments and we are very pleased that the engines are designed for fuel efficiency to help us minimise our impact on the environment.”
 
Mikael Mäkinen, Rolls-Royce, President – Marine said, “The Rolls-Royce designed RRS Sir David Attenborough is the most advanced scientific maritime vessel ever constructed. We had to meet a very demanding list of design requirements from Cammell Laird and its customer, the National Environmental Research Council (NERC) on behalf of the British Antarctic Survey, and work hand in hand with them to make our vision a reality. I’m proud to think that Rolls-Royce equipment, including the B33:45, will play a role in helping future climate scientists understand how changes in the Arctic and Antarctic will impact the wider global climate.”
 
The Bergen B33:45 (two nine and two six cylinder) engines provide both mechanical propulsion and electric power generation in a power range from 3,600 to 5,400kW. The engines, together with the unique Rolls-Royce hull shape design, will allow the RSS Sir David Attenborough to cut through the ice, pushing it away and under the ice sheet being crossed. This enables the vessel to break ice to a thickness of 1.5 metres at a minimum speed of 3 knots.
 
The engines run on low sulphur fuel, have good fuel efficiency down to very low loads and are fitted with a Selective Catalytic Reduction (SCR) system and an electronic engine management system with an integrated control unit. This monitors and controls all key engine functions and exhaust after treatment. The vessel complies with both IMO Tier II and Tier III rules.
 
One of the most stringent design requirements for the vessel was very low levels of underwater radiated noise to allow the undertaking of underwater survey work.
 
Commissioned by the UK’s National Environment Research Council, the RRS Sir David Attenborough is a Rolls-Royce UT 851 PRV design. It meets a very demanding list of design requirements and ensures operators British Antarctic Survey receive the most advanced scientific maritime vessel ever constructed. Commissioned by the UK’s National Environment Research Council, the RRS Sir David Attenborough is a Rolls-Royce UT 851 PRV design. It meets a very demanding list of design requirements and ensures operators British Antarctic Survey receive the most advanced scientific maritime vessel ever constructed.
 
The gensets provide power to the electrical system and 5 MW peak effect battery capacity. Batteries reduce the vessel’s fuel consumption, emissions, noise and vibration as well as increasing redundancy and consequently safety. Using electrical winches instead of hydraulic ones where possible also reduces the risk of pollution.
 
The RSS Sir David Attenborough has been commissioned by the UK’s Natural Environment Research Council (NERC) for operation by the British Antarctic Survey (BAS).This £200 million ($268 mln) Government investment secures the UK’s position as a world leader in polar research and provides a major boost to shipbuilding in the North West. When it enters service in 2019, the ship will carry out oceanographic and other scientific work in both the Antarctic and Arctic as well as transporting supplies to Antarctic research stations.
 
The project is the biggest commercial shipbuilding contract currently underway in Britain and one of the biggest for more than a generation.
 
Rolls Royce’s most recent polar research vessel design project, the Norwegian Institute of Marine Research’s FF Kronprins Haakon, has successfully passed sea trials and will soon be delivered by the shipyard Fincantieri in Italy.
ItalyUnited KingdomUnited Nations