Monday, May 21, 2018
Maritime Propulsion

Posted by November 26, 2014

ClassNK Approves Niigata Dual-fuel Engine Design

Image: ClassNK

Classification society ClassNK has granted approval to the design of the new 28AHX-DF dual-fuel engine developed by Niigata Power Systems Co., Ltd. The new engine is slated to be used as the main engine on a new LNG-fuelled tugboat being built by Keihin Dock Co., Ltd. for NYK Line. The vessel will be Japan’s first LNG fuelled vessel, excluding LNG carriers.
 
New regulations for Emission Control Areas (ECA), including new stricter limits on sulfur emissions as well as the IMO’s Tier III NOx emission limits, are driving demand for new engine and emission control technologies. The high costs associated with low sulfur fuels, and the increasing availability of LNG is driving both vessel owners and machinery manufacturers to consider the use of LNG as a vessel fuel.
 
Niigata’s 28AHX-DF is a medium-speed duel-fuel engine with a maximum rated power per cylinder of 320kW and was developed for use primarily in offshore support vessels and tugboats. The engine, which operates on both diesel fuel and LNG, will meet the strict 0.1% sulfur emissions regulations in the ECA that are set to go into effect in 2015, as well as comply with the IMO’s stringent Tier III NOx emission requirements. Technologies used in the new engine were developed with the support of Japan’s Ministry of Land, Infrastructure, Transportation & Tourism (MLIT), as well as ClassNK as part of the society’s Joint R&D for Industry Program.
 
Yukihisa Shibata, General Manager of ClassNK’s Machinery Department said, “The demand for dual-fuel engines is increasing as IMO restrictions tighten and the industry recognizes the importance of environmental accountability. Supporting the development of such low-emission engines is one way we can help ship operators and manufacturers practically address the challenges of these new regulations, and encourage the wide spread use of this new technology.”
 
The state-of-the-art dual-fuel engine has a maximum rated speed of 800 min-1 with a cylinder bore of 280mm and a 390mm stroke. The model engine will undergo trial operational testing and is expected to receive type approval from ClassNK in December.
 
ClassNKUnited NationsNiigata Power Systems Co. Ltd.

Aluminum Outboard Propeller 9.9x12 for MERCURY Engines 25-30HP

$65.00

Aluminum Outboard Propeller 9 1/4x12 for HONDA Engines 8-20HP

$60.00

F8.5 Aluminum Alloy Propeller 8.9x8.3 for Tohatsu Nissan 8hp 9.8hp / Mercury 4-stroke 9.9hp 8hp outboard motors 8.9" x 8.3"

$67.99

YOUNG MARINE Aluminum Outboard Propeller for MERCURY Engines (25-70HP 10 3/8x14)

$80.00

Aluminum Outboard Propeller 14 x19 for YAMAHA Engines 150-250HP 6G5-45945-01-98

$135.00

Aluminum Outboard Propeller 9.9x13 for MERCURY Engines 25-30HP

$65.00