GE to Supply Equipment for Indian Navy’s Frigate
GE Marine will provide gas turbine auxiliary equipment for the LM2500 engines that will power the Indian Navy’s new P17A frigates. This contract is with India-based Mazagon Dock Shipbuilders Limited (MDL) and Garden Reach Shipbuilders and Engineers Limited (GRSE), GE reported today at the Aero India trade exhibition.Under the contract, GE will provide gas turbine auxiliary equipment for seven ships to support the 14 LM2500 engines previously supplied under a separate contract.
GE Powers US' New Littoral Combat Ship
GE's Marine Solutions' LM2500 marine gas turbines now power the U.S. Navy's USS Manchester (LCS 14). This Littoral Combat Ship was commissioned on May 26 by the U.S. Navy in Portsmouth, N.H.Each of the two LM2500 engines produce over 29,500 horsepower, propelling the USS Manchester to speeds of 40+ knots or 46 miles per hour. To date, GE has contracts to provide gas turbines for ships up to LCS 30 (even ship numbers are Austal Independence class ships). In addition, Austal is one of five shipyards that have been awarded a concept design contract for the U.S.
GE Powers Canada’s New Combat Ships
GE Aviation’s marine gas turbines are the ideal solution for the Royal Canadian Navy’s next generation surface combatant program, GE Marine said Thursday at the CANSEC 2018 trade exhibition.“GE’s LM2500 family of engines are used by the Royal Canadian Navy and 34 other navies worldwide, setting the benchmark for reliability. The global fleet of GE gas turbines has logged over 15 million operating hours in the marine environment and another 90 million in industrial applications,” said Brien Bolsinger, GE’s Vice President, Marine Operations, Cincinnati, Ohio.
Rolls-Royce Gas Turbine Selected for Japan’s New Frigate
Rolls-Royce reports it has been selected to supply its MT30 gas turbine to power a new class of frigates for the Japan Maritime Self Defence Force (JMSDF).The selection means Japan is the fifth nation to select the MT30 for a major naval shipbuilding program.Sam Cameron, Rolls-Royce, Senior Vice President – Defence, said, “Japan’s selection of the MT30 is very significant and means that the three largest users of marine gas turbines, have all endorsed the capabilities of the MT30…
GE Powers New Italian Frigate
Federico Martinengo, the seventh multipurpose FREMM frigate recently delivered to the Italian Navy by shipyard Fincantieri, like all 10 ships in the new Carlos Bergamini-class FREMM frigate program, features the power dense GE LM2500+G4 gas turbine in a COmbined Diesel eLectric And Gas turbine (CODLAG) propulsion system.In 2013, Fincantieri delivered the first Italian FREMM, Carlo Bergamini. In addition to the Italian FREMM frigates, DCNS shipyard in Lorient, France, is well underway having delivered six FREMM frigates in a 10-ship program.
New GE LM2500 Module for US Navy Frigates
GE’s Marine Solutions announced it has completed the acoustic attenuation and weight comparison testing between its new lightweight composite LM2500 gas turbine module and the steel enclosure. The results verified a 2,500-kilogram weight reduction and a significant improvement in noise attenuation—60 percent quieter—when compared to its steel predecessor. “The tests compared the noise and weight of the steel enclosure to the novel one piece composite design. Results verified that the new carbon fiber provides a significant reduction in the wall weight and noise…
GE Gas Turbines for Japan’s JS Asahi Destroyer
Two GE LM2500 marine gas turbines power the Japanese Maritime Self Defense Forces (JMSDF) newest destroyer JS Asahi (DD119). This first of two new destroyers in the JMSDF’s Asahi-class destroyer program was recently commissioned by the JMSDF. The ship was built by Mitsubishi Heavy Industries (MHI) at its Nagasaki Shipyard & Machinery Works in Japan. “We work in concert with IHI, our longstanding partner in Japan, to supply LM2500 marine gas turbines to the JMSDF for this new destroyer and other surface combatant programs,” said GE’s Brien Bolsinger, Vice President, Marine Operations.
GE Gas Turbines to Power US Navy's DDG Destroyers
GE’s Marine Solutions has announced that its LM2500 marine gas turbines have been selected to power the United States Navy’s new DDG 126 and 127 Arleigh Burke-class destroyers. These new destroyers are being built by General Dynamics Bath Iron Works, Bath, Maine. “Each of these sophisticated new surface combatants relies on four powerful GE LM2500 marine gas turbines in a combined gas and gas turbine -- or COGAG -- propulsion arrangement,” said GE’s Brien Bolsinger, Vice President, Marine Operations. “We are honored that this reliable gas turbine assists with our country’s national security.
GE Ships LM2500 Marine Gas Turbine for US Navy
GE's Marine Solutions division said it has shipped a LM2500 marine gas turbine propulsion module that will help power the U.S. Navy's 75th DDG Arleigh Burke-class destroyer Jack H. Lucas (DDG 125). Shipbuilder Huntington Ingalls Industries' Ingalls Shipbuilding division will construct this new destroyer with U.S. Navy Flight III upgrades incorporated. Each DDG destroyer features four GE LM2500 marine gas turbines in a combined gas turbine and gas turbine (COGAG) configuration. "Since 1991 - for just the U.S.
GE Marine Gas Turbine for New US Navy Destroyer
GE’s Marine Solutions said it has shipped a LM2500 marine gas turbine propulsion module that will help power the U.S. Navy’s 75th DDG Arleigh Burke-class destroyer Jack H. Lucas (DDG 125), the company reported at the Surface Navy Association’s 30th Annual Symposium. Shipbuilder Huntington Ingalls Industries’ Ingalls Shipbuilding division will construct this new destroyer with U.S. Navy Flight III upgrades incorporated. Each DDG destroyer features four GE LM2500 marine gas turbines in a COmbined Gas turbine And Gas turbine (COGAG) configuration. “Since 1991 – for just the U.S.
Partners to Boost Australian Navy Fleet Performance
GE and CSIRO’s Data61, Australia's data innovation network, have developed a data analytics solution that will give the Royal Australian Navy greater insights into their fleet engine performance and enhance operational efficiency. GE supplies the Royal Australian Navy with its LM2500 gas turbines that power the Anzac, Adelaide, Canberra and Hobart class vessels. CSIRO’s Data61 has developed an application that will process data from GE engines captured from sensors and use advanced analytics to identify where improvements can be made.
GE Marine Gas Turbines Selected for US Navy, Coast Guard
GE’s Marine Solutions said its LM2500 family of aeroderivative marine gas turbines have been selected to power two newbuild surface combatants for U.S. Navy and Coast Guard programs. Specifically, two LM2500+ gas turbines will power Bougainville (LHA 8), the U.S. Navy’s newest multi-purpose amphibious assault ship. Construction is expected to begin shortly according to shipbuilder Huntington Ingalls Industries. GE LM2500+ gas turbines also power first-in-class USS America (LHA 6) and Tripoli (LHA 7).
USS Rafael Peralta Destroyer Powered by GE Gas Turbines
The U.S. Navy’s USS Rafael Peralta (DDG 115) destroyer was commissioned at its homeport of San Diego, Calif., on Saturday, July 29. The vessel is powered by four GE LM2500 marine gas turbines. “This sophisticated new Arleigh Burke-class destroyer is part of the U.S. Navy’s Flight IIA for the DDG 51 and it is powered by on our LM2500 – the world’s most reliable marine gas turbine – in a combined gas turbine and gas turbine or COGAG configuration,” said GE’s Brien Bolsinger, Vice President, General Manager, Marine Operations, Evendale, Ohio. “The U.S. The U.S.
GE Powered USS Gabrielle Giffords Commissioned
The U.S. Navy’s 10th Littoral Combat Ship (LCS) USS Gabrielle Giffords was commissioned at the Port of Galveston, Texas, on Saturday, June 10, becoming the 16th ship to be named for a woman and only the 13th ship to be named for a living person since 1850. The ship’s homeport will be San Diego. “This is the fifth such LCS in a 10-ship Independence–variant ship program with Austal USA that uses our LM2500. The two LM2500 engines are arranged in a combined diesel and gas turbine or CODAG configuration with two diesel engines…
Rolls-Royce to Power Korean Naval Frigates
Rolls-Royce said it has won a contract to supply MT30 marine gas turbines to power the next three ships in the Republic of Korea Navy’s Daegu-class frigate program. The frigates are intended for a variety of missions including anti-submarine warfare, anti-air warfare, patrol, surveillance, search and rescue, protection of EEZ and transport. In all Eight Daegu-class frigates (also known as FFX Batch 2) are scheduled to be built, the first of which is being built by Daewoo Shipbuilding and Marine Engineering (DSME) and was launched at DSME's Okpo shipyard in June 2016.
GE Gas Turbines Power Japanese Destroyer
GE's Marine Solutions reports that the Japan Maritime Self Defense Force (JMSDF) commissioned its second Izumo-class helicopter-carrying destroyer. The new JS Kaga (DDH 184) is powered by four GE LM2500 marine gas turbines, and was commissioned at the Japan Marine United Corporation shipyard in Yokohama on March 22, 2017. First-in-class JS Izumo (DDH 183) and JS Kaga are the largest surface combatants in the JMSDF fleet. Both feature a powerful and reliable combined diesel and LM2500 gas turbine propulsion system, with the gas turbines using GE’s integrated electronic controls.
New Horizons: Cruise Industry Challenges & Solutions for 2017
Approximately 130 million Chinese citizens travel internationally, making China the world’s largest outbound travel market in the world. With one-sixth of the world’s population, many recognize this country as a market with huge potential. Until a few years ago, travel by ship was a common mode of transport, but China’s rapid economic evolution has attracted more people to leisure travel opportunities and the luxury holiday experience cruise liners can offer. It is anticipated that the number of Chinese passengers will reach 4.5 million by 2020…
Italian Frigate Launched With GE Gas Turbine Propulsion
GE’s Marine Solutions has announced that the seventh multi-purpose Italian FREMM frigate Federico Martinengo, was launched on March 4. The ceremony was held at Fincantieri’s Riva Trigoso shipyard in Genoa, Italy. All of the Italian Navy’s new Carlos Bergamini-class FREMM frigates (10-ship program) feature the same power dense GE LM2500+G4 gas turbine in a COmbined Diesel eLectric And Gas turbine (CODLAG) propulsion system. In addition to the Italian FREMM frigates, the DCNS shipyard in Lorient…