Monday, June 17, 2019

Thordon Bearings News

Photo: Thordon Bearings

CCG Provides Icebreaker Nod for Seathigor

Thordon Bearings has received a Canadian Coast Guard contract to supply six award-winning SeaThigor shaft seals for retrofit installation to three purpose-built icebreakers.The 5,910grt CCGS Pierre Radisson, named after the 17th-century French fur trader and explorer, along with sisterships CCGS Amundsen and CCGS Des Groseilliers, will each be retrofitted with two SeaThigor forward seals during scheduled drydockings over the next year.The order, confirmed on the 1st of April,…

Viking Jupiter has been delivered with a Thordon Bearings’ COMPAC seawater-lubricated propeller shaft system (Photo: Thordon Bearings)

Viking Jupiter Delivered with Thordon COMPAC

Viking Jupiter, the 47,800gt cruise ship built at Fincantieri’s shipyard in Ancona, Italy for Viking Cruises, has been delivered with a Thordon Bearings’ seawater-lubricated propeller shaft system. It is the sixth Viking cruise ship to be fitted out with the COMPAC bearing arrangement.Two 930 passenger-capacity sisterships, Viking Tellus and Viking Venus, currently undergoing construction at Fincantieri and slated for delivery in 2021, have also been specified with the pollution-free Thordon system.

Based on the success of the SXL retrofits, Salinor/Navenor approached Thortech to supply a complete bearing and seal package for the shallow draught bulker Comandante Paschoal (Photo courtesy of Thordon Bearings)

Navenor's Opts for Thordon Bearing

Thordon Bearings has completed a range of water-lubricated and grease-free bearing installations to a third salt lugger in the Salinor/Navenor fleet, following the successful retrofitting of bearings to problematic newbuilds.The Brazilian owner opted for the Thordon package following the failure of the bearings on two newbuilds at the Manaus Shipyard delivered in 2015.The salt carrier Nossa Sra. das Das Vitorias was retrofitted with Thordon’s SXL propeller shaft bearings after just three weeks of operation…

Photo: Thordon Bearings

Thordon Advises on VGP Delay

Thordon Bearings has advised its customers with newbuilds under construction to make sure they have the necessary documentation in place permitting operations in U.S. waters prior to 18th December 2018.The advice follows the October 10 announcement by the U.S. Environmental Protection Agency that the 2013 Vessel General Permit, due to expire in December 2018, will now be administratively continued till at least March 2019, when an updated version, VGP 3.0, will be introduced.“The delay in introducing VGP 3.0 means that operators of existing vessels looking to operate in U.S.

Photo: Thordon

Thordon Bearings Strengthens European Presence

Thordon Bearings, the provider of bearing solutions for marine, has signed sales and distribution agreements with St. Petersburg-based Industrial & Marine Projects (IMPRO) and Tallinn’s Marine Ecology Equipment (MEE), in a development that anticipates the introduction of more stringent pollution rules for European waterways.The appointment of new distributors for Lithuania, Latvia, Estonia, Russia and Azerbaijan coincides with concern that more should be done to reduce the impact…

Photo: Thordon Bearings

Thordon Signs Distributor Agreement with Echetalde

Thordon Bearings confirmed it signed a new sales and distribution agreement during the recent SMM 2018 trade show in Hamburg, Germany.The agreement with Spain’s Echetalde, signed on September 5th, replaces the agreement with Thordon’s previous distributor in the region, Echelan Thor, following the retirement of its founder Pedro Echevarri, after 30 years of working with Thordon products. Thordon Bearings’ CEO Terry McGowan said: “Spain, Gibraltar and Morocco are important market sectors for Thordon Bearings…

Photo: Thordon Bearings

Lomar's Super-Eco Boxships Mark Breakthrough for Thordon Bearings

Delaware Trader, the first of two 2,700TEU newbuild containerships that China’s Guangzhou Wenchong Shipyard is delivering to Lomar Shipping this year, has been fitted with a seawater lubricated propeller shaft bearing system from Thordon Bearings.The vessel represents another breakthrough for Thordon Bearings’ COMPAC seawater lubricated propeller shaft bearing system in the European-owned containership segment.London-headquartered Lomar Shipping, a privately-owned ship owning and management company…


Mr. Shaun Padulo, President at Heddle Marine (left) and Mr. Terry McGowan (right), President and CEO at Thordon Bearings (Photo: Thordon Bearings)

Thordon Bearings, Heddle Marine Partner for Propeller Shaft Conversions

Thordon Bearings Inc. and Heddle Marine Service Inc. have signed a cooperative agreement under which the Canada-based ship repair company will work together with Thordon Bearings Inc. to promote the conversion of ships’ oil lubricated propeller shafts to Thordon’s COMPAC open seawater lubricated bearing system.The agreement will create an action plan in which a specialist team, comprised of Heddle Marine and Thordon Bearings’ personnel, to offer support to ship managers and owners…

A Thordon COMPAC installation (Photo: Thordon Bearings)

Oil-to-water Conversions Success for Great Lakes Bulkers

The oil-to-water lubricated tailshaft conversion Thordon Bearings carried out last year to the 26,260dwt Great Lakes Fleet-managed bulk carrier SS John G. Munson has successfully completed its first season as a diesel-powered ship.The shaft conversion of the 1952-built self-unloader formed a key part of the mammoth 12-month power conversion project completed last year by Fincantieri’s Bay Shipbuilding yard, in Sturgeon Bay, Wisconsin, U.S.The vessel’s steam propulsion plant was replaced with an energy efficient medium-speed diesel arrangement.

Photo courtesy of Thordon Bearings

Alexis Marine To Retrofit Rivertough to Salt Lugger

Louisiana-based inland workboat operator Alexis Marine has awarded a supply contract to Thordon Bearings for the retrofitting of 6in diameter RiverTough bearings to MV Kristin Alexis, the 60ft twin-screw towboat built by Bollinger Shipyard in 1969.Both the vessel’s shafts will be withdrawn at New Orleans yard Bayou Fabricators and Machine Works, where the original rubber bearings will be replaced with Thordon’s RiverTough tailshaft bearings.The polymer bearing manufacturer will…

Thordon Unveils New Bearing Information Portal

Thordon Bearings has unveiled a new web-based platform to provide all the information industry professionals need to know about the commercial, technical and environmental advantages of using grease-free and water-lubricated polymer bearings across a wide variety of applications.Covering all of Thordon’s target market sectors, the new website has been designed to provide shipowners, shipyards and propulsion system integrators, in particular, with the information they need to make more informed procurement decisions…

Installation of Thordon’s RiverTough water-lubricated bearing (Photo: Thordon Bearings)

Thordon to Eqip New Class of Towboat

Thordon Bearings, of Burlington, Ont., has received an order to supply four comprehensive shipsets of stern gear for a new class of towboat.The four boats are being built by U.S. shipyard Master Marine of Bayou La Batre, Ala., for Waterfront Services, based in of Cairo, Ill.. The new vessels have been designed to meet the requirements of Subchapter M, a set of federal rules recently introduced by the U.S. Coast Guard, relating to the inspection requirement for towboats, including seaworthiness standards and safety protocols.The 67ft x 28ft boats…

Gavin Allwright (Photo: IWSA)

Thordon Joins Grwoing IWSA Membership Base

Thordon Bearings has joined a growing number of organizations to have signed up as a full associate member of the International Windship Association (IWSA), the organization established to facilitate and promote the economic and environmental advantages of wind propulsion across the shipping industry.IWSA now has a membership base of over 40 companies and organizations that includes shipowners, naval architects, research institutes, environmental groups and original equipment manufacturers.Thordon Bearings’ President and CEO…

Photo: Thordon Bearings

OTI Installs Thordon's Largest TG100 Seal

Offshore Towing Inc (OTI) has completed the refurbishment of its 1974-built 9000hp-class tug Zion Falgout at the Conrad Deepwater shipyard, in Morgan City, La. The milestone project involved the retrofitting of TG100 seals in what marks OTI’s first mechanical shaft seal installation and the largest diameter TG100 series seals ever supplied by Thordon Bearings. An 11.75in (298mm) diameter seal was installed to each propeller shaft of the 66.88t bollard pull twin-screw workhorse.

Image: Thordon Bearings

Tropical Opts for Seawater Lubricated Shaft Package

Thordon Bearings’ Jacksonville-based distributor Coppedge Marine has secured an order with Tropical Shipping for the COMPAC seawater lubricated propeller shaft bearing system. The COMPAC systems destined for two 300TEU box ships under construction in China, at the Guangzhou Huangpu Wenchong Shipyard, will represent a first reference for COMPAC with this ship owner. “Tropical Shipping is a long-standing customer to whom we have supplied various Thordon equipment over the years,” said Ed Coppedge, Vice-President, Coppedge Marine.

Terry McGowan, President and CEO, Thordon Bearings (seated right), and Mohammad Rizal (left), Chief Operating Officer of Drydocks World- Dubai, sign an agreement that affirms the two companies’ efforts to convert ships to seawater lubricated propeller shaft lines from oil (Photo: Thordon Bearings)

Thordon, DDW-D Partner for Shaft Line Conversions

Thordon Bearings and Drydocks World-Dubai (DDW-D) have signed an agreement under which the UAE-based shipyard will work together with Thordon Bearings Inc. to promote the conversion of ships’ oil lubricated propeller shafts to Thordon’s COMPAC open seawater lubricated bearing system. The agreement will create an action plan in which a specialist team, comprised of Drydocks World-Dubai and Thordon Bearings’ personnel, offer support to ship managers and owners looking to ensure…

Karina Gould, Minister of Democratic Institutions and Member of Parliament for Burlington (center), with Thordon Bearings’ Vice-Chair and Human Resources Director Anna Galoni and President and CEO Terry McGowan (Photo: Thordon Bearings)

Thordon Bearings Bags ‘Build in Canada’ Award

The Government of Canada has signed a procurement agreement with Thordon Bearings for the supply, installation and commissioning of two SeaThigor shaft seals for the Canadian Coast Guard vessel CCGS Hudson. The product and service contract is through the Administration’s Build in Canada Innovation Program, introduced in 2010 to support and invest in home-grown innovations in order to facilitate sustainable economic growth across the country. Announcing the contract last week at Thordon’s production plant in Burlington…

Photo: Thordon Bearings

First Aluminum Hull Reference for Thordon Seal

Fullers Group’s has provided a first reference for Thordon Bearings’ TG100 seal on an aluminum hulled fast ferry. The New Zealand ferry operator’s new 34.9m (114.5 ft.) catamaran Korora, delivered from the Q-West shipyard in December, features a water lubricated propeller shaft arrangement based around a Henley Integrated Propulsion System. Auckland-headquartered Henley Group, an approved Thordon distributor, with a history dating to 1917, secured the contract to design and supply Korora’s complete drivetrain…